The Royal Oak Offshore DIVER Diving Watch is equipped with anti-magnetic protection for the watch case. The extremely sensitive balance spring protects the watch from magnets, vibration and temperature changes, ensuring accurate timekeeping. In addition, after the temperature change test of the watch, no steam condensation was observed. The NIHS 92-11 (ISO 6425) standard requires a diving watch to have a safety device that controls the dive time. In addition, in order to prevent interpretation errors, the device must also be provided with a design that prevents inadvertent inadvertent rotation. The replica Audemars Piguet Royal Oak Offshore DIVER Automatic Finishing Watch is equipped with a chronograph rotating inner ring engraved with a detailed minute scale. The one-way rotating pawl device that controls the rotating inner ring is connected to the crown set at the 10 o'clock position. The wearer must first unscrew the crown to turn the device. Since this is a rotating bezel rather than a rotating bezel mounted on the case, the middle layer of the case can also function as a barrier. The rotating inner ring is marked with a minute scale and has a very eye-catching mark every 5 minutes, which is fully compliant with the NIHS 92-11 standard.
The indication of time, rotation of the inner circle diving time, movement movement or not, etc. must be clearly read at a distance of 25 cm from the dark sea floor. In order to meet this requirement, Audemars Piguet has redesigned the dial of the Royal Oak Offshore DIVER Diving Watch: the stick-shaped scale and the minute hand are both stereo-faced and fluorescent, in order to clearly distinguish between the hour and minute hands, and the two hands in the hour hand. Add a fluorescent edge to each side. The fluorescent seconds hand makes it easy for the wearer to determine the correct operation of the watch. The above display is more eye-catching and easy to read under the super-large plaid decoration of the Royal Oak's unique black “Méga Tapisserie”. In addition, the diving timed rotating inner ring is close to the dial, which not only reduces the risk of inadvertently changing the dive time, but also makes the reading of the dive time more convenient.
In order to ensure a water-resistant depth of up to 300 meters, the case components such as waterproof pad, bottom cover and mirror are adjusted accordingly, mainly to increase the thickness. The NIHS 92-11 standard stipulates that the watch case of a diving watch should have a waterproof depth of more than 100 meters. The bottom cover screws, hexagon bolts and screws the middle of the Royal Oak Offshore logo up and down to lock the case tightly locked, as watertight as submarine portholes. In addition, the Royal Oak Offshore DIVER Diving Watch has also successfully passed the salt water immersion test, the case has no change, and the active components can maintain normal functions.
The indication of time, rotation of the inner circle diving time, movement movement or not, etc. must be clearly read at a distance of 25 cm from the dark sea floor. In order to meet this requirement, Audemars Piguet has redesigned the dial of the Royal Oak Offshore DIVER Diving Watch: the stick-shaped scale and the minute hand are both stereo-faced and fluorescent, in order to clearly distinguish between the hour and minute hands, and the two hands in the hour hand. Add a fluorescent edge to each side. The fluorescent seconds hand makes it easy for the wearer to determine the correct operation of the watch. The above display is more eye-catching and easy to read under the super-large plaid decoration of the Royal Oak's unique black “Méga Tapisserie”. In addition, the diving timed rotating inner ring is close to the dial, which not only reduces the risk of inadvertently changing the dive time, but also makes the reading of the dive time more convenient.
In order to ensure a water-resistant depth of up to 300 meters, the case components such as waterproof pad, bottom cover and mirror are adjusted accordingly, mainly to increase the thickness. The NIHS 92-11 standard stipulates that the watch case of a diving watch should have a waterproof depth of more than 100 meters. The bottom cover screws, hexagon bolts and screws the middle of the Royal Oak Offshore logo up and down to lock the case tightly locked, as watertight as submarine portholes. In addition, the Royal Oak Offshore DIVER Diving Watch has also successfully passed the salt water immersion test, the case has no change, and the active components can maintain normal functions.
